Houston reality capture
The country's petrochemical heart runs on plants whose drawings never matched what got built.
The Houston Ship Channel is the largest petrochemical complex in the United States, holding roughly forty-two percent of the nation's base petrochemical capacity, with thousands of miles of pipeline tying together around two hundred plants and dozens of new units and expansions in progress. Add the Texas Medical Center, the largest medical complex in the world, and a metro with no zoning where development goes anywhere. Every turnaround, tie-in, and renovation in that landscape needs to start from what is actually there.
Why do plant turnarounds start with a scan?
A plant along the Ship Channel has been modified for decades. Pipe was rerouted, equipment was swapped, and the isometrics on file stopped matching the field years ago. When a turnaround or a tie-in is coming, an engineer who trusts the old drawings finds out during the outage that the new spool does not fit, and every hour of that outage is expensive.
A laser scan captures the unit as it actually stands, dense enough to model pipe, steel, and equipment to real coordinates. That point cloud becomes a scan-to-BIM plant and pipe as-built the engineering team can design tie-ins against with confidence, and where a fabricated component or a critical clearance has to be confirmed, a dimensional inspection checks it against the model before it ships. Fewer surprises, shorter outages, tie-ins that fit the first time. It is the same evidence MEP contractors rely on for congested mechanical work.
The Texas Medical Center and everything above the ceiling
The Texas Medical Center is the largest medical complex in the world, a constant churn of expansion, renovation, and fit-out across dozens of institutions. Renovating clinical and research space means working above ceilings packed with existing mechanical, electrical, and plumbing, often on floors that stay in use. Guessing at what runs where is how a renovation runs over.
A scan captures those real conditions in one visit and becomes accurate building and interior documentation the design team can build against, taken to a full scan-to-BIM model where the coordination demands it. The trades see the congestion before they open the ceiling.
How we serve Houston.
We do not keep an office in Houston. We serve the metro through a nationwide network of vetted reality-capture technicians, and we produce and stand behind the deliverable. You get one point of contact, published pricing, and a finished model or report our team is accountable for, whether the site is a unit on the Ship Channel or a tower in the Medical Center.
Published prices.
| Deliverable | Price |
|---|---|
| Half-day scan (capture) | $1,500 to $2,300 to start |
| Full-day scan (capture) | $3,500 to $4,100 to start |
| Modeling from the scan | $0.10 / sq ft ($500 min) |
Capture is the scan itself. Modeling and reporting are scoped to the deliverable you need, so tell us the site and the output and we price it directly.
Explore
Tell us about the Houston site.
Whether it is a process unit heading into a turnaround, a tie-in that has to fit, or a clinical floor mid-renovation, send us the site and the deliverable you need. We scan it, build the model or report, and hand you a record you can act on or hold on to.
Get a quoteQuestions about a project? Reach us at info@scanningandmodeling.com or (772) 210-4584.